PTZ Controller, PT+z Controller™Pan Tilt Bescor™ motor + zoom Canon/Sony LANC

Description

RF Consulting Ltd. PT+z Controller™ Pan Tilt control for Bescor™ motors with zoom control via a 2.5 mm jack LANC for Canon/Sony cameras.
Does not include the
Bescor
MP-101 motor! Not for use with MultiPort connector.
Please note there is usually a three to four day lead time to build this unit after we understand your particular need.  The PT+z Controller can be programmed to pan as fast as the original Bescor remote or slower for live panning, about half the rate of the original remote.
The pan tilt zoom controller, PT+z Controller™, when used in conjunction with the Bescor™ MP series(such as MP-101) motorized pan head allows you to take control of your live video production with an all in one sleek controller that provides dynamic speed control and movement using the natural movement of a joystick. Replacing the Bescor™ Remote Control (MP-Remote) for the MP-101 Motorized pan head with a more intuitive and responsive controller was the primary function of this unit, however we have also incorporated some vital camera functions found on the eBenk® zoom controller for Canon and Sony cameras using LANC/Remote protocol such a zoom in/out and record start/stop. LANC auto-power-on for cameras with a soft power button is also programmed in the PT+Z Controller™, that means if your cameras are remotely located, our unit can power them on.
The PT+z Controller™ unit comes complete and ready to use out of the box with a joystick, a motor interface cable and a 2.5mm LANC cable for connection to a Canon or Sony video camera. If you have extension cables, Bescor or LANC, ran to your existing cameras, you can still use them.
Includes:
PT+z Controller™
Joystick
3 feet - Bescor  to controller cable (7pin DIN cable to RJ45) longer lengths available
3 feet - 2.5mm to 3.5mm controller to LANC camera cable
Features:
Pan
Tilt
Zoom In
Zoom Out
Record
Zoom Speed
Pan / Tilt speed depends on how far the joystick is pushed away from center
No power required
A single cable solution is possible using an optional breakout interface (splitter ) that allows a CAT 5/6/7 (as long as it it terminated as TIA T-568B) cable to carry both pan tilt and LANC commands to a remotely located camera up to 100ft/30m away.
Always ask before ordering if you are not 100% sure this will work for you, or you have not ordered before
.
More details, manual and wiring information available from the manufacturer's website.
Please note:
We need to know the intended use of the product, so that the programming can be customized to your needs.Thank you!
Condition is New.
Shipped with USPS Priority Mail. Free shipping lower 48 only!